Best CPU Coolers for i5-11600K

Introduction

CPU Coolers are cooling systems for the CPU (Central Processing Unit). The CPU is an essential component of any computer, and all CPUs produce heat while performing computations. If too much heat is produced, it can cause the CPU to shut down in critical situations or greatly reduce its lifespan. To prevent this dangerous situation, there are multiple different types of CPU coolers, each with its own advantages and disadvantages. The type of CPU cooler used will depend on the end user’s specific computer configurations, what other components are present in their computers, and what the system requirements are.

Liquid Cooling Systems (LCS)

There are two main types of liquid cooling systems: closed-loop liquid cooling (CLWC) systems and open-loop liquid cooling (OLWC) systems. CLWC systems are more similar to traditional CPU coolers in their design, while OLWCs are more complex.

Closed-Loop Liquid Cooling Systems (CLCW)

A closed-loop liquid cooling system only has a few components that make up its entirety: the pump, tubing, water block, radiator, reservoir, fittings, coolant, and fans. Heat is moved from the CPU into the liquid cooling system via the water block. The liquid cooling system absorbs heat at a rate determined by its thermal capacity, which is represented by its ability to dissipate heat over time.

The liquid cooling system is responsible for moving the heat from the water block to its radiator, where it is released into the environment. The pump moves the coolant through the system, and each piece of tubing connected to it has a uniquely sized fitting that allows only compatible parts (fittings, water blocks, radiators) to be connected.

The reservoir gradually releases coolant into the tubing, and the coolant contains additives like corrosion inhibitors to prevent rust.

Open Loop Liquid Cooling Systems (OLWC)

Open-loop liquid cooling systems are more complex than closed loops because their function is not solely for cooling purposes. Also, they require at least one operational sub-cooler. An operational sub-cooler is a heat exchanger that is separate from the liquid cooling system itself. They are usually submerged in the radiator to help cool its water, and thus it is not possible to have a closed-loop without an operational sub-cooler.

OPLC systems contain pumps, tubing, water blocks, radiators, reservoirs, fittings, coolants, and fans. Open-loop liquid cooling systems are much more complicated than closed loops because the coolant moves through both the pump and subcooled before finally entering the radiator.

Air-Cooling Systems (ACS)

An air cooling system contains all of its components inside a CPU cooler. Air cooling systems are typically larger in size, but provide better cooling than stock coolers because they are designed with more heat-dissipating features, like more heat pipes or larger fans, to increase the rate at which they dissipate heat.

An air cooling system is made up of a heatsink, heat pipes (if it has any), and fans. The heat sink usually includes copper vapor chambers at the bottom, where the heat dissipates.

When you think of spending money on your CPU Cooler you should think about the cooling capacity and not focus on high RPM fans, because you can deal with them in your motherboard’s software. You have to select the best CPU Coolers for i5-11600K. You need to consider the specifications as well as your budget. Amazon is the best place for getting your budget-friendly Cooler.

Here are the some best CPU Coolers for i5-11600K but before we discuss that we have to consider the important tips of for buying.

Tips Before Purchasing

Dimension and Clearance: 

First, you have to trim out the dimensions of your computer cabinet so that it corresponds with the CPU cooler specs. You have to check the exact height, width, and depth before buying the CPU cooler. Also, you have to check for clearance because sometimes it may not fit in your cabinet even though it easily fits in the computer cabinet.

Cooling Capacity:  

You should choose the best CPU Cooler for i5-11600K which has a high capacity of cooling. You have to check the best cooling capacity of the CPU cooler which can meet your requirement. You can check that on Amazon.

Noise Level:

CPU Coolers for i5-11600K which fulfill your cooling requirement is quiet as compared to the noisy ones. So, you should also check the noise level of the CPU Cooler. The noise level will vary from one to another, but you can get a pretty quiet one if you choose carefully.

Compatibility:

You should buy the CPU Coolers for i5-11600K which are compatible with all the PC components. So, you have to check all the compatibility factors before buying any CPU Coolers for i5-11600K related products.

RGBs:

Now, a day’s multi-color LED lights are also available in the CPU Coolers. You can choose them to match with your computer components.

Price:

You have to buy the best CPU Cooler for i5-11600K which is available at an affordable price range. You have to choose the best one which is compatible with your budget as well as has a high cooling capacity for your CPU.

Now, Let’s go for knowing some best CPU Coolers for i5-11600K.

Best CPU Coolers for i5-11600K:

The Best CPU Coolers for i5-11600K You Can Purchase Today!

Cooler Master Hyper 212 Black Edition

Cooler-Master-Hyper-212
Cooler Master Hyper 212 Black Edition (Image credit: Amazon)

Best Value CPU Cooler for i5-11600K

Specifications

Dimensions: 120mm x 79.6mm x 158.8mm – Fans: 1 x 120 x 25 mm RGB – Fan Speed: 650 – 2000 RPM – Weight: 0.7 Kg – Socket Support: 115x, 1366, 2011x, 2066, FM2, FM1, AM2, AM3, AM4 – Warranty: 2 years

Cooler Master Hyper 212 Black Edition is the top best CPU Cooler for i5-11600k. This cooler is among the best-selling CPU Coolers for i5-11600k. It has a very simple design and its performance is also very good for i5-11600K. You will get all the socket support and it is very easy to install. It’s is also very good on the noise level. 

This cooling system is the best thing for high-end gaming and overclocking. This is the best but has some limitations in extreme overclocking. This Cooler has 120mm x79.6mm x158.8mm dimensions and a total weight of 0.7 kg with 1 x 120 x 25 mm RGB fan speed 650-2000RPM. This cooling system uses single tower technology to provide efficient cooling with no dead spots.

Fan of this cooler provides unbelievable 57.3 CFM and cools the CPU at maximum level. It will keep the CPU below 100C and the maximum it reaches 80C.

Corsair made a high-end hyper 212 black edition CPU Cooler for i5-11600k. You can easily set up this cooler because it has excellent software that gives you the freedom to set up it the way you want. It is almost like a decoration for your PC because it has two RGB lightings which make it attractive. You will get 2 years of warranty.

Pros
  • An additional fan can be installed
  • 4-pin RGB and speed control fan header
  • FP120 Silencio fan for lower noise levels
Cons
  • A bit noisy with RGB fan variant
  • Struggles in extreme overclocking

Noctua NH-D15S Chromax.Black

Noctua-NH-D15S
Noctua NH-D15S Chromax.Black (Image credit: Amazon)

Best Air Cooler for i5-11600K

Specifications

Dimensions: 160 x 150 x 135 mm – Fans: 1 x 120 x 25 mm – Fan Speed: 300 to 1500 RPM – Weight: 1.15 Kg – Socket Support: Intel LGA 775 – LGA 2066: AMD AM2 – AM3+, FM1 – FM2+ – Warranty: 6 years

Noctua NH-D15S Chromax.Black is the second-best CPU Cooler for i5-11600k, which you can buy.  It has a very simple design and its performance is also very good for i5-11600k. This cooler has an excellent heat sink which helps to handle the high load of the CPU. This is the best cooling device for overclocking and it will keep your system cool even in a heavy situation.  You will get all the socket support and it is very easy to install. It’s is also very good on the noise level. 

Noctua NH-D15S Chromax.Black has a total weight of 1.15 kg with a single fan speed of 300-1500 RPM. The dimensions of this cooling system are 160 x 150 x 135 mm which makes it look very attractive and beautiful on your PC because you can adjust the height from the bottom side up to 7 mm which will give a unique look to your desktop.

This cooler is built with multi-coated lens technology which makes it very attractive. It has a solid copper contact base to provide maximum heat transfer from CPU to cooling fins. 

The Noctua NH-D15S Chromax.Black is a very premium and best CPU Cooler for i5-11600k and it gives you the best heat transfer than any other cooler on this list. It has excellent software that gives you the freedom to set up it the way you want.

Pros
  • Low noise adapter
  • Extended RAM clearance of up to 65mm
  • One of the most prolonged warranty period
Cons
  • Large in size
  • Single fan as compared to NH-D15 version

be quiet! Dark Rock 4

be-quiet!-Dark-Rock-4
be quiet! Dark Rock 4 (Image credit: Amazon)

Best Overall CPU Cooler for i5-11600K

Specifications

Dimensions: 74 x 136 x 160 mm – Fans: 1 x 135 mm – Fan Speed: 600-1400 rpm – Weight: 0.92 Kg – Socket Support: 1150, 1151, 1155, 1156, 1200, 1366, 2011(-3), 2066, AM2(+), AM3(+), AM4, FM1, FM2(+) – Warranty: 3 years

be quiet! Dark Rock 4 is the cheapest CPU Cooler for i5-11600k, which you can buy. You will get all the socket support and it is very easy to install. It’s is also very good on the noise level. 

This cooling system has a total weight of 0.92 kg with 1 x 135 mm fan speed 600-1400 rpm. The dimensions of this cooling system are 74 x 136 x 160 mm which makes it look very attractive and beautiful on your PC because you can adjust the height from the bottom side up to 4,5 mm which will give a unique look to your desktop.

This cooler has a single tower design with a total of six high-performance heat pipes which transfer the heat from a copper base plate. It has a solid nickel-plated copper base plate to provide maximum heat transfer from CPU to cooling fins.

The Dark Rock 4 is best for overclocking because it provides maximum airflow and keeps it cool except for the high-speed fan. The 2 x aluminum heatsink has a mirror finish which helps to reflect the heat.  It is very easy to set up and you can change or upgrade it anytime in the future if needed.

Pros
  • Super quiet operation
  • 200W TDP Cooling capacity
  • Support additional fan installation
Cons
  • Slightly reduced RAM compatibility
  • It doesn’t support some AMD processors

Corsair Hydro H100x

Corsair Hydro H100x (Image credit: Amazon)

Best 240mm AIO Cooler for i5-11600K

Specifications

Dimensions: 275 x 120 x 27 mm – Fans: 2 x 120 mm x 25 mm – Fan Speed: 600-1700 rpm – Weight: 0.675 Kg – Socket Support: 1200, 1150, 1151, 1155, 1156, 1366, 2011, 2066, AMD AM4, AM3, AM2 – Warranty: 5 years

Corsair Hydro H100x is the fourth-best CPU cooler for i5-11600K on our list and it is also considered as one of the best-closed loop coolers. It gives you a 5-year limited warranty.

This cooling system has a total weight of 0.675 kg with a 2 x 120 mm fan speed of 600-1700 rpm. The dimensions of this cooling system are 275 x 120 x 27 mm which makes it look very attractive and beautiful on your PC because you can adjust the height from the bottom side up to 10,4 mm which will give a unique look to your desktop.

This cooler is designed for extreme cooling and uses a micro-channel cold plate and a split-flow manifold to ensure low thermal resistance. It has a double stack copper tube which increases the heat transfer rate.

The Corsair Hydro H100x is built with precision engineering and you can control this laptop by using Corsair Link software or even mobile devices such as iOS or Android. You will get all the socket support and it is very easy to install.

It is very easy to set up and you can change or upgrade it anytime in the future if needed. It also has a micro-channel cold plate and a split-flow manifold design which provides better thermal efficiency than any other CPU coolers on this list.

Pros
  • Extreme performance
  • AIO (All in One) solution
  • Fans can go up to 1700 rpm
Cons
  • Noisy at high speeds
  • No In-built RGB lighting

Arctic Liquid Freezer II 240

Arctic-Liquid-Freezer-II-240
Arctic Liquid Freezer II 240 (Image credit: Amazon)

Best CPU Cooler for Overclocking the i5-11600K

Specifications

Dimensions: 277 x 120 x 38 mm – Fans: 2 x 120 x 25 mm – Fan Speed: 200-1800 rpm – Weight: 1.191 Kg – Socket Support: 1200, 115X, 2011-3, 2066 Square ILM, AMD4 – Warranty: 6 years

Arctic Liquid Freezer II 240 is the fifth-best CPU cooler for i5-11600k on our list. It has a 6-year warranty and you also get all the socket support with it.

This cooling system has a total weight of 1.191 kg with 2 x 120 mm fan speed of 200-1800 rpm. The dimensions of this cooling system are 277 x 120 x 38 mm which makes it look very attractive and beautiful on your PC because you can adjust the height from the bottom side up to 10,4 mm which will give a unique look to your desktop.

This cooling system has a single tower design with a total of six high-performance heat pipes which transfer the heat from a copper base plate. It has a solid nickel-plated copper base plate to provide maximum heat transfer from CPU to cooling fins as well as reduce the flow resistance.

ThisCPU cooler is best for overclocking because it provides maximum airflow and keeps it cool except for the high-speed fan. It also enhances the performance and reduces noise as well as vibration.

The Arctic Liquid Freezer II 240 uses a pump that is capable of pumping up to 150 liters of water per hour and it has a circulation speed as low as 4 °C/s which delivers reliable, long-lasting performance. It also provides you with an attractive design and the aluminum radiator not only provides better heat dissipation but also allows you to install the fans of your choice.

Pros
  • Large RAM clearance
  • Two-pass Cross Flow design
  • CPU block boasts a 40mm fan for VRM cooling
Cons
  • A little Louder

EVGA CLC 280

EVGA CLC 280 (Image credit: Amazon)

Best 280mm AIO Cooler for i5-11600K

Specifications

Dimensions: 312 x 139 x 27 mm – Fans: 2 x 140 x 25 mm – Fan Speed: 600-2200 rpm – Weight: 0.997 Kg – Socket Support: LGA20XX, 1200, 115X, 1366, AM2, AM3, AM4, FM1, FM2, TR4 – Warranty: 5 years

EVGA CLC 280 is the sixth-best CPU cooler for i5-11600k on our list. It has a 5-year warranty and you also get all the socket support with it.

This cooling system has a total weight of 0.997 kg with a 2 x 140 mm fan speed of 600-2200 rpm. The dimensions of this cooling system are 312 x 139 x 27 mm which makes it look very attractive and beautiful on your PC because you can adjust the height from the bottom side up to 10,4 mm which will give a unique look to your desktop.

This CPU cooler is best for overclocking because it provides maximum airflow and keeps it cool except for the high-speed fan. It also enhances the performance and reduces noise as well as vibration.

The EVGA CLC 280 also provides you with an attractive design and the aluminum radiator not only provides better heat dissipation but also allows you to install the fans of your choice.

This CPU cooler is best for overclocking because it provides maximum airflow and keeps it cool except for the high-speed fan. It also enhances the performance and reduces noise as well as vibration.  EVGA CLC 280  also provides you with an attractive design and the aluminum radiator not only provides better heat dissipation but also allows you to install the fans of your choice.

Pros
  • Large 280mm radiator
  • Customizable RGB lighting
  • Super speed 2200 rpm fans
Cons
  • Extra clearance required for the larger radiator

DEEPCOOL Castle 280EX

DEEPCOOL-Castle-280EX
DEEPCOOL Castle 280EX (Image credit: Amazon)

Best Liquid CPU Cooler for i5-11600K

Specifications

Dimensions: 322 × 138 × 27 mm – Fans: 2 x 140 x 25 mm – Fan Speed: 400-1600 rpm – Weight: 1.6 Kg – Socket Support: LGA20XX, LGA 1200, 1151, 1150, 1155, LGA1366, TRX4, TR4, AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1 – Warranty: 3 years

DEEPCOOL Castle 280EX is the seventh-best CPU cooler for i5-11600k on our list. It has a 3-year warranty and you also get all the socket support with it.

This cooling system has a total weight of 1.6 Kg with 2 x 140 mm fan speed of 400-1600 rpm. The dimensions of this cooling system are 322 x 138 x 27 mm which makes it look very attractive and beautiful on your PC because you can adjust the height from the bottom side up to 10,4 mm which will give a unique look to your desktop.

Because it provides the greatest airflow and keeps it cool, this CPU cooler is ideal for overclocking. It also improves performance and decays noise, as well as vibration.

The DEEPCOOL Castle 280EX also provides you with an attractive design and the aluminum radiator not only provides better heat dissipation but also allows you to install the fans of your choice.

Pros
  • Massive fan output of 97 CFM
  • Skived fins for higher thermal efficiency
  • Anti leakage technology promotes safety
Cons
  • Fans are loud
  • Bulky pump housing

Arctic Freezer 50

Arctic-Freezer-50
Arctic Freezer 50 (Image credit: Amazon)

Quietest CPU Cooler for i5-11600K

Specifications

Dimensions: 148 x 150 x 166 mm – Fans: 1 x 120 mm, 1 x 140 mm – Fan Speed: Weight: 1.26 Kg – Socket Support: 1200, 115X, 2066, 2011(-3), AM4 – Warranty: 6 years

Arctic Freezer 50 is the eighth-best CPU cooler for i5-11600k on our list. It has a 6-year warranty and you also get all the socket support 1200, 115X, 2066, 2011(-3), AM4  with it.

This cooling system has a total weight of 1.26 Kg with 1 x 120 mm fan speed of unknown rpm and 1 x 140 mm fan speed of unknown rpm. The dimensions of this cooling system are 148 x 150 x 166 mm which makes it look very attractive and beautiful on your PC because you can adjust the height from the bottom side up to 6,2mm which will give a unique look to your desktop.

The Arctic Freezer 50 also provides you with an attractive design and the aluminum radiator not only provides better heat dissipation but also allows you to install the fans of your choice.

The Arctic Freezer 50 is ideal for overclockers because it provides maximum airflow and keeps it cool except for the high-speed fan. It also enhances the performance and reduces noise as well as vibration. Thanks to the increase of the airflow and performance, you can gain an additional 2-3% in overclocking speed.

Pros
  • Long 6-year warranty
  • Quietest cooler out there
Cons
  • Inability to change fan
  • RAM larger than 37.5mm cannot be mounted

Conclusion

The Intel Core i5-11600K is the 11th generation high-end Intel CPU with six cores and 12 threads. It has improved single-core and graphics performance as a result of increased IPC and PCIe 4.0. It’s best utilized in high-end gaming systems and needs a suitable cooler to keep its tremendous heat in check while under heavy use. The Noctua NH-D15S Chromax Chromax Black is the most efficient yet reasonably priced heat pipe cooler on the market today. Performance with flair, plus sufficiently cools the 11600K so it can work at full capacity without issue.

 If you’re a delicate and exquisite individual who needs a quieter yet powerful CPU cooler that fits in your setup, there’s no better option than the Be Quiet! Dark Rock 4. It strikes an excellent balance between performance, noise, and beauty. It can effortlessly cool a massive 200W TDP load without annoying you with noise and is the best CPU Cooler for i5-11600K. The budget-friendly Cooler Master Hyper 212 Black Edition is one of the most popular budget CPU coolers for i5 because it can keep your processor cool in all situations other than overclocking.

Frequently Asked Questions

What CPU cooler should I buy for the i5-11600K?

The TDP of the i5-11600K is 125W. A cooler with a higher heat transfer rate than the CPU’s maximum TDP will suffice. If you use a CPU cooling system with a lower thermal capacity, it will not keep the CPU cool enough and it will be forced to operate at lower speeds or even damage the CPU. The Corsair Hydro H100x is an obvious choice since it has significantly more cooling capacity and can easily keep the 11600K cool.

What cooler is best for the Intel Core i5-11600K?

The best CPU Cooler for the i5 11600K is the Arctic Liquid Freezer II 240, which manages superior cooling even during extreme overclocking and significant loads. It has a large 200W TDP cooling capacity that easily keeps the CPU cool, and it comes with a 40mm VRM fan to keep things running smoothly.

Do you have an aftermarket cooler for the i5-11600K?

It does not include a stock cooler. Because the i5-11600K has an unlocked multiplier, the stock cooler is generally included with CPUs with restricted capabilities that do not fully cool it at peak loads. As a result, an aftermarket heatsink like DEEPCOOL Castle 280EX is required that understands and fulfills its demands while also maintaining safe and dependable operation through anti-leakage technology.

Is a cooler required for the i5-11600K?

A CPU is a sophisticated piece of equipment with millions of high-performing transistors crammed into tiny spaces. During operation, this generates a lot of heat, which must be cooled and maintained in order not to harm the CPU. Similarly, EVGA’s CLC 280 fulfills its designation as the best CPU cooler for i5-11600K by efficiently keeping even at heavy loads. It’s the best CPU Cooler for i5-11600K.

We will be happy to hear your thoughts

Leave a reply

Review Zila
Logo
Enable registration in settings - general